LONG ARM PADDLE WHEEL AERATOR
HS-D1216p (Diesel Engine) HS-M0516p (Motor)
LONG ARM PADDLE WHEEL AERATOR
Description
LONG ARM PADDLE WHEEL AERATOR:
DRIVEN BY DIESEL ENGINE
**HS-D1210p 12HP diesel engine & pulley, 10pcs Impeller
**HS-D1210r 12hp diesel engine & reducer, 10pcs impeller
** HS-D1213p 12HP diesel engine & pulley, 13pcs Impeller
**HS-D1213r 12hp diesel engine & reducer, 13pcs impeller
** HS-D1216p 12HP diesel engine & pulley, 16pcs Impeller
**HS-D1216r 12hp diesel engine & reducer, 16pcs impeller
DRIVEN BY MOTOR
** HS-M0210p 2HP MOTOR & pulley, 10pcs Impeller
** HS-M0210r 2HP MOTOR & reducer, 10pcs Impeller
** HS-M0313p 3HP MOTOR & pulley, 12pcs Impeller
** HS-M0313r 3HP MOTOR & reducer, 12pcs Impeller
** HS-M0516p 5HP MOTOR & pulley, 16pcs Impeller
** HS-M0316r 3HP MOTOR & reducer, 16pcs Impeller
Specification
CHARACTER:
- Driven by diesel engine especially suitable for area without electric support.
- With more impellers to improve pond water circulation and best oxygen.
- Less power consumption and less investment cost.
- Easy maintenance and energy saving.
- HS-D1216/HS- M0516 provide about 76.5kgs O2/Hr.
- Active horizontal water current about 70M.
- Active vertical water current about 1.6M to 2.5M.
- Flutter deep about 100-110mm.
SPECIFICATION:
- IMPELLER:
- Trident model with special angle design make strong water flow and high oxygenation performance.
- Low maintenance cost and replaceable.
- Toughness with corrosion.
- FRAME:
- Sturdy stainless steel frame ensure duration and not deformation.
- FLOATER:
- One piece blow mold.
- Resist impact, Acid-alkalinity and UV.
- PLASTIC BEARING:
- Adjustment stand is accommodate to water level changed.
HIGH QUALITY DIESEL ENGINE:
- Newest current design,light weight and powerful output.
- Extra-big size of intake value with high efficiency 10% more than ordinary design.
- The specific compression ration is lifted higher than the compressive pressure, so it can have powerful output even under a heavy load.
- Adopts of precise fuel oil pump with the quickest acceleration. Also has designed with vortex pre-burning room at high combustion power to save oil.
- Lubricating system, cylinder with a cover,using of closed type auto oiling lubrication and multi-filter to have the best lubricating effect and to prevent parts from being worn.
- All components inside of the engine are treated under strict quality control, therefore, it can have excellent performance even for long period of running.
A fully closed engine design with improved muffler, noiseless and quiet for running.
REDUCER STRUCTURE
WORM SHAFT:
- The material of S45C is treated with high frequency waves to possess the hardness of HRC50°±3°.
- The tooth is ground with the professional shaft and grinder to decrease the friction coefficient and obtain accurate lead , pressure angle and tooth thickness.
- Meantime , the measure pin is used to inspect to control the accurate contact surface and the requirement of replace-ability.
WORM WHEEL:
- The tooth which is made of ALBC3,is formed with the professional tool machined with the precision hob and deburred with the chamfering machine.
- The precision steel balls are used to test the precision of the tooth.
BODY:
- The material is FC20. Before machining,red lead is sprayed to coat the internal and external surfaces of the body.
- Double boring machines as well as professional boring tools are applied to machine at a time to assure the same centerline and vertical angle of the bearings.
MODEL |
HP |
IMPELLER |
GEARING FACILITY |
CAPACITY OF
20/40 FEET CONTAINER |
HS-D1216 (Diesel Engine) |
8 |
15 |
REDUCER |
16/32 Units |
HS-M0516 (Motor) |
2 |
15 |
REDUCER |
16/32 Units |
Manufacturer reserves the right to change the specification contained herein without notice